Pages

Tuesday 18 January 2011

Tips on Tuesdays! -> Binding

Hi!  Welcome back to Tips on Tuesdays!  This week is all about binding. 

 
Please leave a tip in the comments section at the end of the post.  It's like 'take a penny, leave a penny'.  Here are a couple tips I have learned from others.  From Joyce (a fabulous guild member and blog follower) I learned to lay the binding out around the quilt first to make sure that no bulky seams end up right where you will be mitering corners.  Ah ha!  Smart one!

And here's a little pictoral on making those mitered corners.  When your needle is 1/4 inch from the end of the quilt, turn and stitch off at a 45 degree angle like this (thanks again Joyce for that one!):

Then turn the quilt, and fold the binding back and up like this, using the angled stitch-off as your guide:


Then fold it back down so that the raw edge is aligned with the raw edge of the quilt like this:


Now all you do is stitch down that side with a 1/4 inch seam.  Repeat when you get to the next corner.  Mark that stitch off angle if you need, so you know when your needle is 1/4 inch from the bottom edge, like this:


Then when you press the binding back, the perfect mitre just magically appears!  Tada!


Sharon Schambler closes her mitres with a ladder stitch to keep them from popping.  SMART.

quick little ladder stitch, pull and it closes like a zipper!

You can see the entire tutorial for making & attaching perfect binding HERE.  It's loaded with photos at every step.  What do you have to say about binding?  We would love to read about it.  Please share!  Pin away : )


Bloggers can grab a linky or leave their blog address in the comments section.

~Monika : )

108 comments:

  1. great pictures, thanks. Do you sew your binding on the back first? or is this just to show the stitching more easily?
    I don't have tips, I am not expert at this !!

    ReplyDelete
    Replies
    1. Mostly I see the binding to the back and hand stitch the front. Gives s more finished look. However on children's blankets I often use a very contrasting thread color and a decorative stitch.

      Delete
    2. Yes, you attach binding on back first especially if you are machine sewing binding on both sides because the top sides stitching will be the side you want to look best and you can cover up the stitching from the back with the edge of the binding. Good luck and try using a nice decorative binding top stitch.

      Delete
  2. I need serious binding help! Here is my one tip. I didn't have binding clips or even the hair clips that work like them so I used another kind of hair clips. You can see them here:
    http://harriethomemakerstrikesagain.blogspot.com/2010/11/orange-nest-baby-quilt-done.html

    I need to get a quilt top quilted so I can try that binding technique. I had major troubles with corners and meeting the ends of the binding.

    ReplyDelete
  3. I bought a whole container of the binding clips, but use just ONE.. I press my binding from the front to the back, but then go one step further and press the binding to the back...then I use the one clip about 6 inches ahead of my needle. Too many clips drive me crazy..

    ReplyDelete
  4. My binding tip is: many patterns tell you to cut your binding on the bias. This isn't really necessary if your quilt edges are straight. (exceptions are things like scalloped edges or you want the print of the fabric - like a stripe to lay on an angle). So cut your bindings on the straight of grain and save yourself some fabric (and money!).

    ReplyDelete
    Replies
    1. If you are making a heirloom quilt you need to cut your binding on the bias.

      Delete
    2. The benefit of bias binding even on a quilt even without scallops is that the binding will take a lot more wear and last longer. Many people have gone to straight cut binding because its easier to but I've seen binding wear out too quickly because of that more than once. I still stick with the way my great grandma taught me, bias binding.

      Delete
    3. I couldn't agree with you more. Also it makes the whole business easier. I am not about to scrimp on a cheaper way of finishing a quilt that took a month or more to create!

      Delete
  5. Wow Monika! Thank you. Binding is my favorite part of quilting. I looooove it!
    I've learned another neat trick since I did the binding demo at guild. This one makes a nice non-bulky corner.
    After the binding has been stitched all the way around, snip the fold that was created as in your third picture above, just to the seamline. Turn it back and you'll see where the binding was mitered. Snip out the diagonal stitching which will then expose a small triangle of fabric. Clip this piece off and voila! bulk is gone.
    Also when turning the binding to the back, reverse the fold so that front and back are folded in opposite directions. This also gives a flatter finish.
    Perhaps you might post pics after you've tried this?
    Now I'm off to stitch a binding on a Serendipity quilt :)
    Joyce

    ReplyDelete
  6. Use hand quilting thread when sewing on the binding. This thread is stronger and pulls through the fabric more easily. Also, question for Monika; how did you resolve the tension issue when free motion quilting on your machine? :)

    ReplyDelete
    Replies
    1. Excellent! You wouldn't happen to know of great needles for the job. I've got rather big hands and find ordinary hand sewing needles too small. Longer needles tend to be bigger and leave a mark. Cheers. Karen.

      Delete
  7. Point of clarification, when hand sewing the binding on to the quilt.

    ReplyDelete
  8. Wow! Great tips! Have I mentioned my hand sewing aversion? I machine stitch my bindings all on. They aren't nearly as pretty, but I get them done, and sometimes that's more important :-). I either sew the binding on the top, wrong sides together, flip it then stitch in the ditch on the top, catching the back as I go... The back doesn't look nice, but the top looks just fine. Or, I stitch on the back side, then flip and do a neater top stitch on the front. The back looks nicer this way, and both sides look pretty good.

    ReplyDelete
  9. I like how you have done your binding. This is a real area of much needed improvement for me. Is that a 2 inch strip, with the wrong sides together and then sewn on? So, when you flip the binding to the other side the edge is already finished and just needs to be stitched on? Sounds easier than the way I have been doing it!

    ReplyDelete
  10. You do your binding the same way I do mine so I don't have a tip to add but I wanted to say that I love your Tips on Tuesdays!

    ReplyDelete
  11. I just use 6 or so clips ahead of where I am stitching. I don't clip all the way around. Too much stuff to deal with.

    ReplyDelete
  12. Hey, I found a fellow Canadian! I was referred to your blog by the Fiber Nation blog... do you mind if I share this with my guild? That pic where you sew right off on the angle is fantastic. Think I will follow you to!

    ReplyDelete
  13. I took a Cotton Theory workshop and now I sew my binding to the back of the quilt first and then do a fancy stitch I learned at the workshop and machine sew the binding to the front. I also test my binding on the quilt before I sew to make sure no seams are on the corners.

    ReplyDelete
  14. What a great tip and tutorial! thanks!

    ReplyDelete
  15. Great ideas - thanks for sharing

    ReplyDelete
  16. Thank you for this idea. Found you on Pingerest. Kathy

    ReplyDelete
  17. I always do both sides of my binding with my machine. Love saving time. If I feel like it, then I do hand stitch the last side... sometimes that's on the front... sometimes that's on the back! The more I read about it, the more I find out that MORE and MORE quilters would much rather spend time piecing or appliqueing.... NOT hand-stitching their bindings! Personal preference, I guess!

    ReplyDelete
  18. Thanks so much for posting this. I found this on Pinterest. I appreciate your generosity in sharing your expertise.

    ReplyDelete
  19. Thanks for the tip I pinned it for later

    ReplyDelete
  20. Hand sewing the binding is my quiet time after I finish the rest of the quilt. I machine stitch to the front, then press to the back and hand stitch. Love the photos and other comments.

    ReplyDelete
  21. Thank you!! I was just trying to figure out the best way to do this!! The one I did the other night didn't turn out this nice!!!

    Tip: use foam backed vinyl table cloth material for the inside layer of a traveling baby changing station. Wet protection AND a little cushioning!!

    ReplyDelete
  22. For all you (like me)that have trouble getting a grip on those little tiny needles used for hand quilting, go to your local beauty supply store and buy a bag of finger cots. They are inexpensive, thin so that you can still feel the needle and are the best grippers. I just put one on my index finger of the hand that I use to grab the needle. Also, they come in sizes.

    ReplyDelete
  23. One commenter talked about cutting your binding on the grain, which for many cases, is just fine, however, if you are sewing anything that expects to get a lot of use, and wash, especially a baby blanket, it is essential to cut your binding on the bias- it lasts 3 times as long!

    ReplyDelete
  24. What a great tutorial! I love this. The only question I have is, after you've folded down the fabric and are ready to sew again, where do you place your needle? Do you start at 1/4 inch or can you start at the edge? Could you post a picture?

    ReplyDelete
  25. It is much easier to sew your binding to the finished quilt top before attaching the back and batting to quilt it. I also agree it is fine to use binding fabric cut on the grain. Bias binding is necessary only if the edges are curved.

    ReplyDelete
  26. If I am making a wall hanging quilt or a quilt that won't need a lot of washing or a quilt that is going in a show I will hand stitch the binding. If I am making a high use quilt, for example one for a child, I will machine stitch the binding so that it is much stronger and less likely to pull apart from the quilt.

    ReplyDelete
  27. Thanks for the tip about making a 45 degree angled sewing line at the corner. Mine didn't work out quite as well.

    Here's mine:
    I don't have binding clips. I use paper clips, works quite well and costs next to nothing.

    ReplyDelete
  28. Great tip ... thanks!! My tip is a follow up to another comment that said cutting the binding on the bias is not necessary if your quilt edges are straight. While I agree that in that case the "flexibility" of the bias cut is not necessary, cutting on the bias also positions the threads of the binding fabric so that they run in a criss-cross pattern over the edge of the quilt where the binding folds. This is a high-wear area--often holes first appear in the folded edge of the binding. The criss-cross of threads in a bias-cut binding gives the folded edge extra strength.

    ReplyDelete
  29. Thank you SO much for this neat trick! Gonna try it today & then share with the young girls in our church/homeschool quilting co-op!

    ReplyDelete
  30. Thanks for this great tip. I am new to quilting and binding and have been picking up tips whenever I see them. Easy to see how it comes together and appreciate pics!

    ReplyDelete
  31. Thank you, thank you. Your pictures were perfect and now I can finally finish my blankets.
    diane

    ReplyDelete
  32. When binding I cut it 2 1/2 inches wide, fold/press in half and sew to the front first. Then I stitch in the ditch from the front to grab the binding on the back. I especially do this for baby quilts as I want them to be sturdy and useable for enjoyment. I like the tip about the sewing the angle as I would make the corner like that without the firmness of stitching to hold the fabric.

    ReplyDelete
  33. Just found your version of perfect mitred corners! Thank you- its a great idea!

    ReplyDelete
  34. Thanks for the great info & the diagonal stitch off. I am learning to quilt, my first, so am not handy with those kinds of tips. I do make baby/kid blankets with different wide bindings & since I machine stitch most everything, I sew the mitered corner fold with a fancy machine stitch. I use a vine-flower stitch for girls & a dog or duck stitch for boys. That stops the kids from pulling the binding apart at the corner or sticking things in there. Occasionally I stitch 1-2 inches of that stitch to each side of the inside corners on the binding for the cute effect.

    ReplyDelete
  35. I dislike sewing the binding on.... I seem to always mess us the corner... But i am going to try this diagonal stitch. Hanks very much.

    ReplyDelete
  36. I found your tip on Pinterest - thanks so much for sharing your expertise. I love that you stitch off to the edge and then restart on the next side - I'm sure it's easier than the method I tried. I'm trying it on my next project for sure!

    ReplyDelete
  37. Before putting on the binding, zig zag all around the edge of the quilt. This compresses the three layers and makes the final step of binding a breeze.

    ReplyDelete
  38. Someone made a comment that cutting your binding on the grain saves fabric over cutting on the bias. Not if you make your binding like this:

    Measure the perimeter of your quilt and add about 12" or so. Multiply that number by 2.5 (for 2-1/2" binding). Then find the square root of that number (with a calculator if you're not a math-geek like me, lol!) Now cut yourself a square with sides a little bigger than that number (maybe to the next biggest whole number). Cutting a square is easier than cutting long strips?--I think so.

    Now, fold your square on the diagonal and cut on the fold so you have two triangles. With right sides facing together, match two of the squares sides so that one triangle is pointing one way and the other is pointing the other. Two points should meet each other and the third point on each triangle should not be touching. That's as good as I can explain it without pictures.

    Iron it flat. It should look like a rhombus. Now, following the grain use a quilting ruler (it's see-through) to mark lines across that are 2.5" apart. If there is some left at the top that is less than 2.5" just cut that off.

    The next part is a little tricky to explain. You're gonna fold your fabric right sides facing and you must sew the two diagonal bias edges together, but instead of matching the top strip to the top strip and so on, you're going to match the top strip of one side to the second strip down of the other side. Keep in mind that your pencil lines should cross at 1/4" from the edge where the seam you sew will be. Sew the seam. Iron the seam. Now start cutting along your pencil marks. The pencil marks may not have matched up perfectly where you sewed the second seam, but just cut somewhere in the middle as straight as you can. You'll see that you will just be cutting one long bias strip.

    This is called continuous bias binding I think. Maybe you could google it with pictures. Hopefully I've explained it well enough.

    Good luck! Happy quilting.

    ReplyDelete
  39. I've found that if you make a little pocket at the beginning of the binding it makes ending the binding a snap. Leaving a copy of the video I learned this from. Works great! http://www.youtube.com/watch?v=xWh90tXr7g4

    ReplyDelete
  40. My binding always looks like a 5 year old did it. I will try this trick it looks really clean and neat.

    ReplyDelete
  41. If your binding fabric is thin, fragile, slippery, unravelly (well, i think it's a word, so there!) or otherwise badly behaved, iron on some lightest weight interfacing to the whole strip before you start. Makes it so much easier to produce a smooth, even finish.

    ReplyDelete
  42. The explanation for continuous binding is excellent. I've taught this method in my classes but I have a sample made up for each step.(I guess because I am a visual learner) but I could visualize what she wrote. It's super easy & bias binding will last much longer on a well-used quilt. I sew binding on the same as your tutorial but sewing to the corner is brilliant ! I'll do this from now on ! Found you on Pinterest.

    ReplyDelete
  43. That's Genius!!!&= less handstitching.
    Thanks bunches

    ReplyDelete
  44. Thanks for the tip on doing that last bit of stitch at 45 degrees will try on current quilt. My tip is i use my safety pins to hold the binding whilst hand sewing. They dont slip off if i hsve to carry it around.

    ReplyDelete
  45. Hi there! Just came across your binding tut on Pinterest. Nifty tip! Now here's my penny: machine stitch binding to the back of the quilt, fold binding over to the front and instead of stitching in the ditch, use a zigzag stitch on the binding edge. I've done this with invisible thread (on a double sided baby quilt) and colored quilting thread (on various other quilts). Both have turned out well.

    ReplyDelete
  46. Today I am finishing up the first big commission. It's the view over Jackfish Lake from the little Meota highway. This is a retirement..
    عراق سوفت
    نتائج السادس الاعدادي

    ReplyDelete
  47. Great comments! I sew one side of the binding (front or back) then I press 1/4" fusible strips under the other side before hand sewing it down. It's flatter and neater and easier to sew if I'm travelling!

    ReplyDelete
  48. I just started quilting and have done only 2 quilts..both for babies...I use the double folded bias tape for my binding..it works well for me.

    ReplyDelete
  49. Helen Thorkelsen Malcolm9 December 2015 at 21:07

    I use the same method , have for years. I do one extra step. After I have stitched all around the binding to the quilt I do one more row of stitching just inside the first row of stitching with fuseable thread in the bobbin. I go just up to each corner. I then press the binding to the back with my steam iron and I never have to use clips or pins to hold the binding in place. It is always neat and it is great to sit in the evening and hand stitch the binding down. never getting a poke from a pine. I know that this is an extra step but the results are grand

    ReplyDelete
  50. I've only made a couple baby and a couple throw sized quilts, but I've noticed that if I cut the extra batting and backing off after I've sewn the binding to the top, it's a MUCH cleaner line and much easier to make the corners square. Prior to this I would cut the batting and backing after quilting, and line up the binding with the new cut edge.

    ReplyDelete
  51. OK, I've got the front of the quilt mastered. Well maybe not completely mastered as in show quality, but I'm a work in progress as is my quilting technique. Now I want to see someone bend that binding back over the seam allowance and make it look just as perfect on the other side..

    ReplyDelete
  52. Hi! I miss going back to quilting after taking care of two others for a few years!
    I have always found the binding the worst part of my quilts. I could do the top in a few days, but not the binding! So I am going to try this!
    Alot of quilters do not agree with m3, but so I don't have a seam down the middle of the back, I would buy a flat sheet. It has always worked for me and I can hand quilt through it just fine. ( I am cheap, so I go to thrift stores, goodwill, and yard sales and buy flat sheets.) Have a nice day!

    ReplyDelete
  53. THANK YOU!!!!! I have been needing this help and didn't even know it!

    ReplyDelete
  54. THANK YOU!!!!! I have been needing this help and didn't even know it!

    ReplyDelete
  55. thank you for great tip, I don't make too many quilts, 4 so far, for each grandchild, :) but always have trouble with the old corners, usually just fluke it, and there not too bad, but will try this now, cool thanks ill be cheking in to your site more often now, I love tips. I saw you on Pinterest ta, Tina :)

    ReplyDelete
  56. When I make continuous binding, I only mark the cutting line for the first 10 or so inches and then sew it together. Once it is in a tube, I then complete the cutting line markings. This way I never have to deal with trying to match any lines. Turns out perfectly every time.

    ReplyDelete
  57. I use little round suede stickers from the notions departments. They are reusable and more comfortable than a thimble. It usually takes 4 movies to bind an extra long twin (dorm size). I start sewing the binding about 18" from the corner and give it a 6 " tail on both ends for ease. Documentarys and Merchant Ivory films are relaxing and go with the meditating mind . A slow fun reveal..

    ReplyDelete
  58. My tip...I make the double binding (or French fold) but to make it easier for me to sew and keep edges from being uneven, I use a little Elmers glue stick when I am ironing the binding strip in half....keeps edge even while sewing.

    ReplyDelete
  59. Love designing, piecing, and even machine quilting my little masterpieces, but start hyperventilating when it comes time to bind them. With four beautiful quilts needing only binding to finish them off, thought I would read, reread, and reread again those "how to bind" tips on the internet. Chanced on your tutorial on Pinterest which the great angle sewing tip and the clear pictures and now can't wait to get at it! Also tickled to be learning from a fellow Canadian. I'm quilting here down in Nova Scotia!

    ReplyDelete
  60. I use bobbi pins instead of clips, 6 or so then move them along.

    ReplyDelete
  61. I love to make rounded corners on my baby quilts. I just use a small plate and trace it to make nice rounded corners. Then I finish with a bias binding. I love the unique look, as well the ease. No corners to mess with and it turns out perfect every time!

    ReplyDelete
  62. Sharon Schamber has a wonderfully helpful DVD about binding. I've used her glue basting technique as taught by her daughter, Cristy Fincher, and it really works well. (Check your spelling on Sharon's name)

    ReplyDelete
  63. I struggle with mitere corners. Very helpful. Thank you

    ReplyDelete





  64. Carla Reed
    FOUND YOU ON Pinterest. Love all the ideas on Mitered corners. Mine are all weird. Going to keep looking for your blog every Tuesday. I am in the same boat as the lady above, decided to read and read before doing the binding. Thanks for all those tips, ladies.

    ReplyDelete

  65. شركة ضهوة لمكافحة الحشرات وإبادة القوارض ورش المبيدات والتخلص من النمل الأبيض ومكافحة الصراصير والبق الفراش شركة عريقة لها إسم كبير في مجال مكافحة الحشرات ويمكننا التخلص وإبادة الفئران والصراصير ومكافحة الطيور والحمام بمنتهى السهولة وأفضل الطُرق الفعالة والقويـة. بأسرع وقت وبأفضل سعر ممكن معنا كن مطمئنًا
    #ضهوة الهاتف: 0542722270 - واتس آب 0505108424


    شركة مكافحة حشرات
    أفضل شركة مكافحة حشرات بالدمام
    شركة مكافحة حشرات بالدمام

    #اليوم_العالمي_للصحبه
    #اتاوي_لكاس_الملك_ناوي
    #غرد_بذكر_الله
    #الحرب_العالميه_الثالثه

    ReplyDelete
  66. Thanks for the great tip on mitered corners. Will definitely try it. I love hand sewing my binding on the back after machine sewing the binding to the front. My tip...instead of using clips to hold the binding I use Elmers glue after pressing the binding to the back. I also zigzag my quilt edges to keep everything compressed.

    ReplyDelete
  67. I am happy to have the tip to mark the angle to know where to stop at 1/4. ..I struggled with that..great tip!Mine is. . I use my serger with knife raised to baste around my quilt before binding. .Fast!!

    ReplyDelete
  68. I am SO EXCITED to see this online. I took a very short class on binding and we learned this method. But being a new quilter at the time I didn't catch on entirely. So happy to have the pictures to go along with the written directions.

    ReplyDelete
  69. Love all these tips, will use a few!
    Mine isn't for sewing/quilting fabric, it's for what to do with spent/bent needles or pins: Use empty Tic Tac containers. Fill it up, close the lid, and toss container and contents together. For rotary cutting blades: Empty round chewing gum containers work the same way..

    ReplyDelete
  70. Impressing !
    Thanks for sharing

    ReplyDelete
  71. نوفير اليكم الان من خلال موقعنا افضل نتائج التنظيف شركة غسيل خزانات مكة المتيمزه و توفير افضل و احدث الوسائل المتيمزه من موقعنا في التنظيف و بافضل شركة تنظيف مفروشات مكة تميز الان و العمل عيل افضل و اعلي مستوي من الجوده و بافضل تميز الان شركة تنظيف فلل مكة من موقعنا تواصلو معنا الان و احصل عيل افضل اعمال التنظيف المتيمزه

    ReplyDelete
  72. Mind blowing, lightweight,webroot key code activation fused protection for PC, Mac and Android, cloud-based Webroot Internet Security Complete with antivirus guarantees singular information by thwarting the latest malware, phishing, and advanced ambushes. Visit to present webroot antivirus in your pc.

    ReplyDelete
  73. mcafee antivirus mcafee.com/activate is broadly utilized aantivirus distinguishes and kill PC infection, the mail worms,the trojan programs,and likewise helps your framework free of infection and other malware is a significant every day challenge. for more subtleties visit today.

    ReplyDelete
  74. Webroot SecureAnywherewebroot.com/safe AntiVirus keeps watch on obscure projects until its cerebrum in the cloud goes to a judgment. It's an extremely common framework, yet testing demonstrates that it carries out the responsibility, and does it well.

    ReplyDelete
  75. All purchasers worldwidewebroot.com/safe have been casualties of cybercrime. Webroot offers total insurance from infections and data fraud for every one of your gadgets, without backing you off.

    ReplyDelete


  76. Norton is a good antivirus that protects the system from online viruses and malware. Norton Antivirus is very easy to use. Users can download, install and activate it by Norton Setup.

    [url=https://nortnsetup.com/]norton.com/setup [/url]

    ReplyDelete


  77. Today the world is incomplete without Internet, each one of us remain online 27*7 without knowing the fact of virus attacks that can ruin computers drivers or software.

    norton.com/setup


    ReplyDelete
  78. If you are unable to print from your Brother printer because it is showing ‘Printer Offline’ message, then learn How to fix Brother MFC-L2750DW Offline Problem to get back online or do some changes to your printer’s setting, and you will get your printer back online and you can continue print your documents again. If you’re using brother printer offline, fix on windows 10 & mac operating system.

    ReplyDelete
  79. How to fix and Bring Back HP Envy 5020 Printer is offline to Online? There could be several factors responsible for the occurrence of HP Envy 5020 Printer is offline error, just follow the steps given below will help you resolve it effortlessly.

    ReplyDelete

  80. Roku activation code is an alpha numeric code which helps users to enable their roku device or tv. If the activation phase has been

    completed, computer would require them to display their fav stuff online at one place.

    roku.com/link

    ReplyDelete
  81. Facing problem while Connecting your Dell e525w Printer to WiFi Modem? You can follow simple steps to Connect Dell e525w Printer to WiFi Network here. The Dell e525w Printer comes with built-in WiFi connectivity and automatic two-sided printing. You can easily connect your Dell e525w to the wireless network via WiFi protected setup (WPS).

    ReplyDelete
  82. Do you know the reason behind the Kindle won’t connect to wifi error? If you want a proper solution and want to know the reason behind this error then get in touch with us. Our team will help you in resolving this error. To know more visit our website Ebook Helpline and we are available 24/7 to help you.

    ReplyDelete
  83. I'm gone to convey my little brother, that he should also pay a quick visit this weblog on regular basis to take updated from newest news.

    ReplyDelete
  84. I always used to read article in news papers but now as I am a user of net thus from now I am using net for articles, thanks to web.

    ReplyDelete
  85. My brother suggested I might like this web site. He was entirely right. This post truly made my day. You can not imagine just how much time I had spent for this information! Thanks!

    ReplyDelete
  86. Want to connect your ios with a wireless hp printer but do not respond. Check the printer hardware and software properly. Make sure printer is connected with the wireless network or router. Further, have a look at printer software , drivers etc. Now, follow the steps and fix hp printer offline problems in windows and mac.

    ReplyDelete
  87. Hp Printer in Error State issue can also arise due to faulty or incompatible printer driver. Want to Solve HP Printer in Error State??

    Our team provides online solutions 24/7 for Hp Customers.

    Visit Here: My Hp Printer is in an Error State

    ReplyDelete
  88. This 0x6100004a Hp Printer Error is usually happened due to mechanical damage or paper jam can occur this error. Here is the best solution for that Follow the given blog steps.

    Visit Here: 0x6100004a Hp Printer Error

    ReplyDelete
  89. "mcafee is an antivirus software providers that secure your computer for virus , worms ,trojens and other mailcious program .it provides full range of
    security product like antivirus , firewall etc .you have to do mcafee antivirus download "

    ReplyDelete
  90. "Kaspersky Free is a completely free security solution that does not show any
    third-party advertisements. Kaspersky Free also does not collect your personal data.
    We value your privacy. Kaspersky Total Security is an overall good internet security suite. to click this link kaspersky antivirus"

    ReplyDelete
  91. Amazon is an American multinational technology company which focuses on e-commerce, cloud computing, digital streaming, and artificial intelligence. It is one of the Big Five companies in the U.S. information technology industry, along with Google, Apple, Microsoft, and Facebook. amazon .com

    ReplyDelete
  92. Hey friend, it is very well written article, thank you for the valuable and useful information you provide in this post. Keep up the good work! FYI, Pet Care adda
    Credit card processing, Klara and the Sun PDF Download ,my favourite movie essay

    ReplyDelete
  93. Without the subscription, you will not watch some channels and the latest movies. For that, you must have a subscription to Disney plus.
    Disneyplus.com/Begin

    ReplyDelete
  94. Are you looking for an automatic tax calculator application? If yes then you are at the right place. Activate.hrblock.com provides you with a wide range of help to calculate and maintain your tax returns.

    activate.hrblock.com
    activate.hrblock.com
    activate.hrblock.com

    ReplyDelete

Leaving a comment? Yes please!
Reading your messages are the best part of my day.
~Monika K.